Topic Leader(s)
Topic Overview
Detailed Description: Brief update cover CNTT Edge. After reviewing the Reference Model, it was determined that the Reference Model met the Edge groups criteria in its current state. Proposals for changes to the CNTT reference architectures, both RA1 (OpenStack) and RA2 (Containers) can be found at CNTT Edge - RA01 ( OpenStack ) Architecture - Scenario. This will serve as the basis for the discussion for the planning for the upcoming work that needs to be incorporated into the next (Elbrus) release targeted for January.
Slides & Recording
CNTT Edge - RA01 ( OpenStack ) Architecture - Scenario
Minutes
Pankaj reviewed his outline and asked for comments. Beth: there are two types of edge that are quite different. The far edge has very different characteristics than the data center. Telco edge is more focused more on low latency than other use cases. O-RAN is a use case that is latency sensitive use case. SD WAN is a mixed use case, purpose-built edge or uCPE based software. The controllers are located in the core cloud. Time sync is important O-RAN, RAN video processing, UPF - User Plane Fn for packet routing, forwarding inspection, etc. and possibly other use cases. We have not spent time characterizing all the use cases yet. Use cases are a good way of mapping the Edge requirements, but we should not get bogged down in the details or create silos. We should create a set of profiles that abstract the use cases. We cannot proscribe the HW, but at the far edge is much more dependent on the HW. From an architecture view, we need to be able to support very distributed profiles. We can simplify all the use cases with the profiles.
...